TD6 · Scottish Borders · for landlords
Air source heat pumps surveyed in Melrose
Melrose has one of the most varied housing stocks in the Borders — Victorian villas around Dingleton and the High Street, smaller estates off Weirhill and traditional cottages up toward Eildon. Combine that with a high proportion of second homes and holiday lets and you get a town where reliable heating, sensible servicing intervals and quiet, efficient kit really matter.
Several large Victorian villas have legacy gravity-fed systems we routinely upgrade to fully pumped, controlled setups. For air source heat pumps, that changes the survey, specification or working sequence before price is agreed.
MCS Certified and RECC member, we design and install air source heat pumps across Melrose. Most of our customers access the Home Energy Scotland Grant (currently up to £7,500) plus an interest-free loan on top — we handle the entire application as part of the quote. Crucially, every system is sized from a proper room-by-room heat-loss survey, not a back-of-the-envelope kW figure, so it actually performs through a Borders winter rather than just ticking a grant box. This page is specifically for landlords who need to check property suitability, emitter changes and grant-ready system design.
Relevant work pattern
What comparable work looks like
- Air source heat pump retrofit at a Newstead property paired with larger radiators.
- Annual gas safety certificates across a portfolio of Melrose holiday lets.
- System boiler upgrade in a Dingleton villa — new pressurisation, smart controls and weather compensation.
Continue by property need or nearby area
- Boiler Installation for MelroseOld boiler, flue and any redundant pipework removed and disposed of responsibly.
- Servicing & Repairs for MelroseHonest fix-vs-replace advice — most repairs are well under the cost of replacement.
- Bathroom Installations for MelroseDaily clean-down, dust-sheets and floor protection — we treat your home properly.
- Melrose neighbourhood guidesSee property-level notes within Melrose.
Melrose questions worth answering first
Are heat pumps a good fit for Melrose villas?+
Often, yes — but the radiators usually need upsizing, and we'll model heat loss properly for the older stone walls. We'll be honest if a high-efficiency boiler is a better short-term fit.
Can you service Melrose holiday lets out of season?+
Yes — we deliberately keep autumn slots free for holiday-let owners across TD6. Booking in September or early October avoids a January breakdown when the property is fully booked.
What should be checked before quoting air source heat pumps at this Melrose property?+
Some narrow High Street access means we plan boiler deliveries and skip placement carefully. We confirm that point on site, then match the air source heat pumps specification to the actual building and access rather than assuming every TD6 address is alike.
Is this page aimed at landlords?+
Yes. The recommendations prioritise landlords who need to check property suitability, emitter changes and grant-ready system design. If the building or occupancy differs, the survey is where we adjust the plan.
Will it actually keep my home warm in a Scottish winter?+
Yes — modern Vaillant and Mitsubishi units operate efficiently down to around -15°C. We size and design every system specifically for Scottish climate conditions and check radiator output room-by-room.
Am I eligible for the £7,500 grant?+
Most owner-occupied Scottish homes qualify. We confirm eligibility and guide you through the Home Energy Scotland application as part of the quoting process at no extra cost.
Property and access context
Melrose details that affect the specification
- Several large Victorian villas have legacy gravity-fed systems we routinely upgrade to fully pumped, controlled setups.
- Holiday-let owners regularly book annual servicing well in advance to avoid a peak-season breakdown.
- Heat pump enquiries have risen sharply with the Eildons backdrop — owners want low-noise outdoor units that disappear into the garden.
- Some narrow High Street access means we plan boiler deliveries and skip placement carefully.
A practical route through the project
STEP 1
Install & commission
Typically 3–5 days on site, fully commissioned, MCS certified and registered. We also check: Several large Victorian villas have legacy gravity-fed systems we routinely upgrade to fully pumped, controlled setups.
STEP 2
Property survey
Full heat-loss survey, fabric assessment and a look at existing emitters and cylinder space.
STEP 3
MCS-compliant design & quote
Sized for your specific property and lifestyle, not a generic spec.
STEP 4
Grant paperwork
We complete and submit the Home Energy Scotland Grant application on your behalf.
The work people here actually ask us to solve
This page is written for landlords who need to check property suitability, emitter changes and grant-ready system design.
- 01System boiler upgrade in a Dingleton villa — new pressurisation, smart controls and weather compensation.
- 02Air source heat pump retrofit at a Newstead property paired with larger radiators.
- 03Annual gas safety certificates across a portfolio of Melrose holiday lets.
Useful coverage around Melrose
- Air Source Heat Pumps in Eildon FootTD6 9 · Victorian villa upgrades, new-build snagging and zoned-control retrofits at the residential foot of the Eildon Hills south of Melrose.
- Air Source Heat Pumps in DarnickTD6 9 · Listed-property-aware boiler swaps, oil-tank work and cylinder upgrades across the stone cottages and detached homes of Darnick.
- Air Source Heat Pumps in NewsteadTD6 9 · Off-grid oil, LPG and heat-pump work in the historic Tweedside village of Newstead — conservation-sensitive plant siting and flood-aware installs.
- Air Source Heat Pumps in GattonsideTD6 9 · Heat-pump installs with PV-diverter pairing, oil-tank work and bathroom refits across Gattonside's mix of cottages, bungalows and newer detached stock.
What we document before leaving
- Heat-loss surveys done in-house, not outsourced
- MCS Certified installer (MCS number on every quote)
- RECC consumer code member — full deposit and workmanship protection
Start with the property, not a stock air source heat pumps quote
Tell us the building type, the issue and your TD6 address. We will confirm whether a survey, diagnostic visit or urgent response is the useful next step.
Melrose is not being treated as an interchangeable location page. The recommendation starts with several large victorian villas have legacy gravity-fed systems we routinely upgrade to fully pumped, controlled setups. It then combines air source heat pumps, the needs of landlords, access via the A6091, and nearby coverage toward Newstead and Darnick.
Tell us what is different about your property
Postcode, building type, occupancy and photographs help us preserve the same property-specific approach when we quote.
Get Your Free Quote
Tell us about your project — we'll respond within one working day.