EH32 · East Lothian · for landlords
Low-temperature heating planned for Aberlady
Aberlady is a small, conservation-led coastal village sitting between Longniddry and Gullane, with the bay and nature reserve on one side and a fringe of larger detached homes climbing toward Luffness and Spittal on the other. The village core is tightly conservation-controlled, the housing stock leans older and stonework-heavy, and there's a notable second-home and holiday-let contingent — so flue siting, conservation-area sensitivity and pre-season servicing all weigh more here than in the modern estates further inland.
Many of the older Main Street and Haddington Road properties have legacy gravity-fed systems we routinely upgrade to fully pumped, sealed and properly balanced. For air source heat pumps, that changes the survey, specification or working sequence before price is agreed.
MCS Certified and RECC member, we design and install air source heat pumps across Aberlady. Most of our customers access the Home Energy Scotland Grant (currently up to £7,500) plus an interest-free loan on top — we handle the entire application as part of the quote. Crucially, every system is sized from a proper room-by-room heat-loss survey, not a back-of-the-envelope kW figure, so it actually performs through a Borders winter rather than just ticking a grant box. This page is specifically for landlords who need to check property suitability, emitter changes and grant-ready system design.
Relevant work pattern
A relevant job pattern from this area
- Gravity-to-fully-pumped sealed system upgrade in an Aberlady Main Street stone cottage with new TRVs and a magnetic filter.
- Conservation-aware boiler relocation in a Haddington Road property to free up the kitchen layout, with re-routed flue and Building Notice paperwork lodged.
- Pre-season holiday-let service round for a managing agent covering several EH32 properties in one block-booked window.
Where air source heat pumps fits local properties
This page is written for landlords who need to check property suitability, emitter changes and grant-ready system design.
- 01Pre-season holiday-let service round for a managing agent covering several EH32 properties in one block-booked window.
- 02Gravity-to-fully-pumped sealed system upgrade in an Aberlady Main Street stone cottage with new TRVs and a magnetic filter.
- 03Conservation-aware boiler relocation in a Haddington Road property to free up the kitchen layout, with re-routed flue and Building Notice paperwork lodged.
Before you book: local practical answers
Can you do a boiler swap in the Aberlady conservation area?+
Yes — we plan flue routes around conservation-sensitive elevations, prefer rear or side terminations where consents allow, and check with East Lothian planning on anything borderline before quoting. Most EH32 conservation work goes through under permitted development with the right siting.
Are you set up for letting-agent holiday-let rounds in Aberlady?+
Yes — block-booking pre-season services and landlord CP12s for letting agents is a regular part of our EH32 work. We chase tenant access, issue digital certificates the same day, and set 30-day renewal reminders so nothing lapses.
What should be checked before quoting air source heat pumps at this Aberlady property?+
Aberlady Conservation Area covers the bulk of the village core — external flue terminations and any visible pipework on Main Street elevations need careful planning and sometimes a Listed Building check. We confirm that point on site, then match the air source heat pumps specification to the actual building and access rather than assuming every EH32 address is alike.
Is this page aimed at landlords?+
Yes. The recommendations prioritise landlords who need to check property suitability, emitter changes and grant-ready system design. If the building or occupancy differs, the survey is where we adjust the plan.
Do I need new radiators?+
Sometimes one or two need upsizing — rarely the whole house. We tell you exactly which (and the cost) inside the written quote, before you commit.
Will it actually keep my home warm in a Scottish winter?+
Yes — modern Vaillant and Mitsubishi units operate efficiently down to around -15°C. We size and design every system specifically for Scottish climate conditions and check radiator output room-by-room.
Property and access context
Read the property before choosing the system
- Many of the older Main Street and Haddington Road properties have legacy gravity-fed systems we routinely upgrade to fully pumped, sealed and properly balanced.
- Coastal exposure across the bay justifies stainless or coated flue terminations on properties facing the reserve.
- Holiday-let owners want a single September or October pre-season service slot with digital records issued the same day.
- Aberlady Conservation Area covers the bulk of the village core — external flue terminations and any visible pipework on Main Street elevations need careful planning and sometimes a Listed Building check.
The local cluster served from this page
- Air Source Heat Pumps in GreenlawTD10 · 25 minutes via the A697
- Air Source Heat Pumps in ChirnsideTD11 · 35 minutes via the A6105
- Air Source Heat Pumps in West LintonEH46 · 1 hour 5 minutes via the A72 and A701
- Air Source Heat Pumps in GorebridgeEH23 · 1 hour via the A7
- Air Source Heat Pumps in GullaneEH31 · 1 hour 10 via the A1 and A198
Checks and records that matter for this job
- MCS Certified installer (MCS number on every quote)
- RECC consumer code member — full deposit and workmanship protection
- Vaillant Advanced Installer experience on the same engineering team
Related local guidance
- Bathroom Installations for AberladyTypical full refit completed in 7–10 working days, en-suites in 5–7.
- Boiler Installation for AberladyMagnetic system filter and full power-flush included on system upgrades.
- Servicing & Repairs for AberladyLandlord CP12 gas safety certificates issued promptly with reminder service.
- Aberlady neighbourhood guidesSee property-level notes within Aberlady.
How this job moves from question to completion
STEP 1
Property survey
Full heat-loss survey, fabric assessment and a look at existing emitters and cylinder space. We also check: Many of the older Main Street and Haddington Road properties have legacy gravity-fed systems we routinely upgrade to fully pumped, sealed and properly balanced.
STEP 2
MCS-compliant design & quote
Sized for your specific property and lifestyle, not a generic spec.
STEP 3
Grant paperwork
We complete and submit the Home Energy Scotland Grant application on your behalf.
STEP 4
Install & commission
Typically 3–5 days on site, fully commissioned, MCS certified and registered.
Air Source Heat Pumps in Aberlady: get the scope right before the price
A written Aberlady quote follows a proper look at the property, including the local constraint highlighted above and the needs of landlords.
Aberlady is not being treated as an interchangeable location page. The recommendation starts with many of the older main street and haddington road properties have legacy gravity-fed systems we routinely upgrade to fully pumped, sealed and properly balanced. It then combines air source heat pumps, the needs of landlords, access via the A1 and A198, and nearby coverage toward Longniddry and Spittal.
Tell us what is different about your property
Postcode, building type, occupancy and photographs help us preserve the same property-specific approach when we quote.
Get Your Free Quote
Tell us about your project — we'll respond within one working day.