EH42 · East Lothian · for landlords

Heat pump design for the way Dunbar homes lose heat

Dunbar mixes historic harbour-side properties, Victorian villas along the seafront and modern estates inland. The town sits in one of the sunniest, driest pockets in Scotland but still gets serious easterly exposure on the coast — which changes how outdoor pipework, flue terminations and heat-pump units need to be specified.

Modern inland estates are gas-fed and combi-friendly. For air source heat pumps, that changes the survey, specification or working sequence before price is agreed.

MCS Certified and RECC member, we design and install air source heat pumps across Dunbar. Most of our customers access the Home Energy Scotland Grant (currently up to £7,500) plus an interest-free loan on top — we handle the entire application as part of the quote. Crucially, every system is sized from a proper room-by-room heat-loss survey, not a back-of-the-envelope kW figure, so it actually performs through a Borders winter rather than just ticking a grant box. This page is specifically for landlords who need to check property suitability, emitter changes and grant-ready system design.

Dunbar questions worth answering first

Do you cover Dunbar even though it's a fair drive from Kelso?+

Yes — we run dedicated East Lothian days that take in Dunbar, so EH42 work is scheduled efficiently rather than as a one-off long trip.

Should harbour-side Dunbar properties spec anything special?+

Yes — corrosion-resistant flue terminations and external pipework are well worth specifying on harbour-side EH42 properties. We do this as standard.

What should be checked before quoting air source heat pumps at this Dunbar property?+

Coastal salt-air exposure on harbour and seafront addresses — corrosion-aware components specified. We confirm that point on site, then match the air source heat pumps specification to the actual building and access rather than assuming every EH42 address is alike.

Is this page aimed at landlords?+

Yes. The recommendations prioritise landlords who need to check property suitability, emitter changes and grant-ready system design. If the building or occupancy differs, the survey is where we adjust the plan.

Am I eligible for the £7,500 grant?+

Most owner-occupied Scottish homes qualify. We confirm eligibility and guide you through the Home Energy Scotland application as part of the quoting process at no extra cost.

Do I need new radiators?+

Sometimes one or two need upsizing — rarely the whole house. We tell you exactly which (and the cost) inside the written quote, before you commit.

Property and access context

Dunbar details that affect the specification

  • Modern inland estates are gas-fed and combi-friendly.
  • Strong holiday-let market means autumn pre-season servicing is in demand.
  • Older Victorian villas often have legacy gravity systems we upgrade to fully pumped.
  • Coastal salt-air exposure on harbour and seafront addresses — corrosion-aware components specified.
Installed air source heat pumps detail relevant to Dunbar
A representative air source heat pumps detail; the final specification follows an on-site survey in Dunbar.

The work people here actually ask us to solve

This page is written for landlords who need to check property suitability, emitter changes and grant-ready system design.

  • 01Gravity-system to fully-pumped upgrade in a seafront Victorian villa.
  • 02Holiday-let pre-season service round across several harbour properties.
  • 03Combi swap in a modern inland Dunbar estate, completed in a day.

Relevant work pattern

What comparable work looks like

  • Holiday-let pre-season service round across several harbour properties.
  • Combi swap in a modern inland Dunbar estate, completed in a day.
  • Gravity-system to fully-pumped upgrade in a seafront Victorian villa.
On-site air source heat pumps detail relevant to Dunbar
The method and components are selected for the property rather than copied from another address.

A practical route through the project

  1. STEP 1

    Property survey

    Full heat-loss survey, fabric assessment and a look at existing emitters and cylinder space. We also check: Modern inland estates are gas-fed and combi-friendly.

  2. STEP 2

    MCS-compliant design & quote

    Sized for your specific property and lifestyle, not a generic spec.

  3. STEP 3

    Grant paperwork

    We complete and submit the Home Energy Scotland Grant application on your behalf.

  4. STEP 4

    Install & commission

    Typically 3–5 days on site, fully commissioned, MCS certified and registered.

What we document before leaving

  • MCS Certified installer (MCS number on every quote)
  • RECC consumer code member — full deposit and workmanship protection
  • Vaillant Advanced Installer experience on the same engineering team

Need a clear air source heat pumps next step for this Dunbar property?

Share photos and a short description from Dunbar first. We will use the local access and system context on this page to prepare the right visit.

Dunbar is not being treated as an interchangeable location page. The recommendation starts with modern inland estates are gas-fed and combi-friendly. It then combines air source heat pumps, the needs of landlords, access via the A1, and nearby coverage toward Belhaven and West Barns.

Tell us what is different about your property

Postcode, building type, occupancy and photographs help us preserve the same property-specific approach when we quote.

Get Your Free Quote

Tell us about your project — we'll respond within one working day.

Gas Safe Free Site Visit 5-Star Rated