Smart heating controls in the Scottish Borders should improve how the building is used rather than simply replace a wall thermostat. We trace the existing wiring centre, valves and hot-water arrangement before choosing controls, then configure schedules and zones around occupancy. That matters particularly in larger homes, rentals and mixed-use buildings where one temperature and one timer rarely suit every room.
Click your town for the local page — local housing stock, fuel mix, planning quirks and recent jobs we've done nearby.
Step 1
We identify valves, zones, wiring and the current heat-demand logic.
Step 2
Scheduling, remote access and room control are matched to occupancy.
Step 3
Receivers and sensors are installed without bypassing system safeguards.
Step 4
Schedules, app access and manual overrides are demonstrated clearly.
Local context matters — housing stock, fuel mix and access vary street by street across the Borders. Below are neighbourhoods we cover often:
Plumbing and heating for Maxwellheugh's mix of Victorian villas and 1960s detached homes — long pipe runs, hard water, and listed-neighbour planning sensitivity all factor in.
Combi swaps, gas upsizing, and landlord gas safety work on Kelso's 1970s–80s Broomlands estate, with care on flue positions and garage-conversion relocations.
Zoned-heating diagnostics, unvented cylinder service work, and heat-pump retrofits on Kelso's late-90s Pinnaclehill estate.
Off-grid oil, LPG and heat-pump work on the south bank of the Tweed at Springwood Park, with flood-aware plant-room siting and OFTEC tank compliance.
Combi replacements, landlord CP12s and social-landlord servicing across Langlee's mix of council, housing-association and private stock on the hill-top estate.
New-build snagging, smart-thermostat retrofits and cylinder upgrades across original and modern stock in Tweedbank at the end of the Borders Railway.
Tenement-aware boiler swaps, leak tracing and lead-pipe upgrades along Buckholmside's stone-built mill-era closes on the north-west side of Galashiels.
Cylinder upgrades, smart-controls retrofits and heat-pump feasibility surveys on Mossilee's 1990s–2000s detached stock north of Galashiels.
Council, housing-association and right-to-buy combi work on Hawick's Burnfoot estate, with back-boiler removals and flue-siting care on four-in-a-blocks.
Often, but receiver and hub position matter; we check signal paths before fixing equipment.
Yes on compatible system-boiler arrangements, usually by retaining or upgrading the existing motorised zones.
No. They are useful where room schedules genuinely differ, but good hydraulic balance remains essential.
Central Heating — Scottish Borders
Full central heating systems across the Scottish Borders — first-time installations, system conversions (open-vent to sealed, gravity to ful…
Underfloor Heating — Scottish Borders
Underfloor heating work in the Scottish Borders starts with floor construction, heat loss and available build-up, not a generic pipe spacing…
Servicing & Repairs — Scottish Borders
Annual servicing, breakdown repairs, landlord gas safety certificates (CP12) and heating system upgrades across the Scottish Borders. Gas Sa…
Tell us where you are and what you need — we'll come back the same working day. Or call our 24/7 line on 07747 002334.
Tell us about your project — we'll respond within one working day.
