Lauder · TD2 · Scottish Borders

Leak Detection in Lauder

Lauder is a wide-street market town high on the Lauderdale plateau, with notable exposure to wind and cold-snap weather. That changes the conversation — radiator sizing, frost protection and proper heat-loss surveys really do matter here. The mix of Georgian high-street properties and newer estates off Burnside makes for varied work.

Non-destructive water leak detection across Lauder — thermal imaging, acoustic correlation, tracer-gas and moisture-mapping to find a hidden pipe failure without taking up the whole floor. We work directly with insurers (most policies cover the trace-and-access cost), provide a written report with thermal images for your claim, and follow on with the repair so you only deal with one trade rather than three.

Hidden leaks in Lauder usually show first as unexplained pressure-loss, a damp patch on a downstairs ceiling or a water-meter that ticks overnight. We use thermal imaging, acoustic correlation and tracer gas across TD2 properties so the floor only comes up where the leak actually is — saving the wider tile, screed or floorboard run.

Travel from our Kelso base: 35 minutes via the A68.

Local considerations in Lauder

  • Several large hotels and listed properties in town need bespoke design rather than domestic kit.
  • Off-grid properties out toward Westruther and Oxton are a regular oil and LPG patch.
  • High exposure to easterly winds means oversizing radiators slightly is often the right call.
  • Frost protection on outdoor pipework needs proper detailing in TD2.

What we'll do for you

  • Thermal imaging finds underfloor heating, central heating and hot-water leaks fast.
  • Acoustic correlation pinpoints pressurised mains and hot-water leaks under solid floors.
  • Tracer-gas (hydrogen / nitrogen mix) used for slow leaks below screed or behind tile.
  • Insurance-friendly written report with thermal images and pressure-test data.
  • Repair carried out by the same engineer — no second trade visit.
  • Re-instate pressure and full leak-test before sign-off.

Recent Lauder leak detection work

  • Oil boiler service round through Oxton and Westruther.
  • System boiler upgrade with smart weather-compensation controls in a Burnside estate property.
  • Frost-damaged pipework repair on an exposed Lauder property after a hard cold snap.

Every Lauder leak job is documented with thermal images and pressure-test data — useful for insurance claims and for the trades following on behind us.

How leak detection works in Lauder

  1. Step 1

    Symptom triage

    We talk you through the symptoms — pressure-loss, damp patch, meter ticking — to plan the right detection method.

  2. Step 2

    On-site detection

    Thermal, acoustic or tracer-gas survey. Most leaks pinpointed in 60–90 minutes.

  3. Step 3

    Repair & re-test

    Cut-out, fix and pressure-test the affected section. Floor lift kept to the smallest possible area.

  4. Step 4

    Insurance pack

    Written report with thermal images, pressure data and a clear cost breakdown for your insurer.

Why homeowners in Lauder pick us

  • Thermal imaging camera and acoustic correlator on every leak job
  • Insurance-ready written reports with photo evidence
  • Single trade — detect, repair and re-test in one visit where possible
  • Fully insured public liability for trace-and-access work

Lauder Leak Detection FAQs

How do you allow for Lauder's exposure when sizing radiators?+

We add a margin to the standard heat-loss calc for Lauderdale exposure, and recommend higher-output radiators in north-facing rooms. It costs a little more up front but stops cold spots in January.

Do you cover Oxton and Westruther?+

Yes — both are part of our regular TD2 round, including off-grid oil and LPG servicing.

How much does leak detection cost?+

A standard non-destructive survey is typically £180–£280. Most home insurance policies cover this 'trace and access' cost — we provide the paperwork your insurer needs to reimburse you.

Will you have to lift my floor?+

Only directly above the leak — usually a single tile or one floorboard. The whole point of acoustic and thermal detection is avoiding the wider lift that traditional methods cause.

Can you fix the leak the same day?+

Most accessible pipe leaks are repaired on the same visit. Underfloor heating leaks may need a return visit if a specialist coupling has to be ordered, but the leak is isolated immediately.

Lauder heating engineer needed?

Frost protection, oil servicing and properly sized installs across TD2.

Lauder's exposure makes proper heat-loss design genuinely important — TD2 is a 35-minute run from Kelso and one of the rounds where good engineering pays back fastest.

Get a free Lauder leak detection quote

Tell us about your project and we'll be in touch — usually the same working day. Or call our 24/7 line on 07747 002334.

Prefer to read first? See our main or browse all areas we cover.

Get Your Free Quote

Tell us about your project — we'll respond within one working day.

Gas Safe Free Site Visit 5-Star Rated