Earlston · TD4 · Scottish Borders

Leak Detection in Earlston

Earlston sits on the A68 between Kelso and Lauder, with a strong commuter contingent thanks to the Borders Railway at nearby Tweedbank. Newer estates off Mill Road and the older High Street stone properties make for a tidy mix of straightforward combi swaps and more involved system upgrades.

Non-destructive water leak detection across Earlston — thermal imaging, acoustic correlation, tracer-gas and moisture-mapping to find a hidden pipe failure without taking up the whole floor. We work directly with insurers (most policies cover the trace-and-access cost), provide a written report with thermal images for your claim, and follow on with the repair so you only deal with one trade rather than three.

Hidden leaks in Earlston usually show first as unexplained pressure-loss, a damp patch on a downstairs ceiling or a water-meter that ticks overnight. We use thermal imaging, acoustic correlation and tracer gas across TD4 properties so the floor only comes up where the leak actually is — saving the wider tile, screed or floorboard run.

Travel from our Kelso base: 20 minutes via the A68.

Local considerations in Earlston

  • Easy A68 access keeps response times fast across TD4.
  • A growing number of EV-owning households are also asking us about heat pumps — sensible questions given the property type.
  • Estates off Mill Road and Bothwell Park are typically gas-fed with system or combi boilers — quick like-for-like swaps.
  • High Street stone properties sometimes need a flue and pipework re-route on installation.

What we'll do for you

  • Thermal imaging finds underfloor heating, central heating and hot-water leaks fast.
  • Acoustic correlation pinpoints pressurised mains and hot-water leaks under solid floors.
  • Tracer-gas (hydrogen / nitrogen mix) used for slow leaks below screed or behind tile.
  • Insurance-friendly written report with thermal images and pressure-test data.
  • Repair carried out by the same engineer — no second trade visit.
  • Re-instate pressure and full leak-test before sign-off.

Recent Earlston leak detection work

  • Heat-loss survey and heat-pump quote for a modernised cottage near Gordon.
  • Bathroom refit in a High Street stone property including walk-in shower.
  • Like-for-like Vaillant combi swap on a Mill Road semi, completed in a single day.

Every Earlston leak job is documented with thermal images and pressure-test data — useful for insurance claims and for the trades following on behind us.

How leak detection works in Earlston

  1. Step 1

    Symptom triage

    We talk you through the symptoms — pressure-loss, damp patch, meter ticking — to plan the right detection method.

  2. Step 2

    On-site detection

    Thermal, acoustic or tracer-gas survey. Most leaks pinpointed in 60–90 minutes.

  3. Step 3

    Repair & re-test

    Cut-out, fix and pressure-test the affected section. Floor lift kept to the smallest possible area.

  4. Step 4

    Insurance pack

    Written report with thermal images, pressure data and a clear cost breakdown for your insurer.

Why homeowners in Earlston pick us

  • Thermal imaging camera and acoustic correlator on every leak job
  • Insurance-ready written reports with photo evidence
  • Single trade — detect, repair and re-test in one visit where possible
  • Fully insured public liability for trace-and-access work

Earlston Leak Detection FAQs

Are you fast on emergency call-outs to Earlston?+

Yes — Earlston is a 20-minute run from our Kelso base via the A68, so emergency call-outs in TD4 are usually attended the same day.

Are heat pumps realistic in Earlston commuter homes?+

Often yes — newer Earlston properties have insulation and outdoor space that suit heat pumps well. We model heat loss properly and tell you honestly if a high-efficiency boiler is the better short-term move.

How much does leak detection cost?+

A standard non-destructive survey is typically £180–£280. Most home insurance policies cover this 'trace and access' cost — we provide the paperwork your insurer needs to reimburse you.

Will you have to lift my floor?+

Only directly above the leak — usually a single tile or one floorboard. The whole point of acoustic and thermal detection is avoiding the wider lift that traditional methods cause.

Can you fix the leak the same day?+

Most accessible pipe leaks are repaired on the same visit. Underfloor heating leaks may need a return visit if a specialist coupling has to be ordered, but the leak is isolated immediately.

Earlston gas engineer needed?

Same-day attendance on most TD4 emergencies. Free written quote either way.

Earlston is one of our quickest-response areas — TD4 is just 20 minutes up the A68, and the housing stock makes for a healthy mix of simple swaps and full upgrades.

Get a free Earlston leak detection quote

Tell us about your project and we'll be in touch — usually the same working day. Or call our 24/7 line on 07747 002334.

Prefer to read first? See our main or browse all areas we cover.

Get Your Free Quote

Tell us about your project — we'll respond within one working day.

Gas Safe Free Site Visit 5-Star Rated