TD7 · Scottish Borders · for rural owners
Repair and commission floor heating in Selkirk
Selkirk's hilly layout and largely older stone-built housing stock make for some of the more interesting heating jobs we take on. The town climbs sharply from the Ettrick Water and many of the older terraces have awkward boiler locations — converted attics, understair cupboards and outhouses. Practical experience with these layouts is exactly what we bring.
Many homes still rely on tank-fed hot water — we give honest advice on whether a combi conversion is the right call. For underfloor heating, that changes the survey, specification or working sequence before price is agreed.
Underfloor heating work in Selkirk starts with floor construction, heat loss and available build-up, not a generic pipe spacing. We plan wet systems for extensions, renovations and low-temperature heat sources, while also diagnosing manifolds with stuck actuators, airlocked loops or uneven room temperatures. The design is coordinated with floor finishes and the main heating controls so the system remains serviceable after handover. This page is specifically for rural owners who need to design or repair floor heating around construction, finishes and heat loss.
Where underfloor heating fits local properties
This page is written for rural owners who need to design or repair floor heating around construction, finishes and heat loss.
- 01Cold-snap radiator upgrades on an exposed Selkirk hillside property.
- 02Back-boiler removal and combi install in a West Port terrace, freeing the chimney breast for a new fireplace.
- 03Oil boiler service round through Ettrickbridge and Yarrowford.
Property and access context
Read the property before choosing the system
- Many homes still rely on tank-fed hot water — we give honest advice on whether a combi conversion is the right call.
- Steep Selkirk streets mean we plan boiler deliveries and skip placement around access — not all addresses suit a kerbside drop.
- Older stone-built terraces around West Port and the Market Place often have legacy back-boilers we routinely replace with combis.
- Cold-night exposure on the higher streets means oversizing radiators slightly is often worthwhile.
Checks and records that matter for this job
- Pressure test completed before floors are closed
- Accessible manifold and labelled loop schedule
- Low-temperature design experience for heat-pump projects
The local cluster served from this page
- Underfloor Heating in PhiliphaughTD7 5 · Oil boiler swaps, hybrid heat-pump installs and septic-aware system work along Selkirk's Philiphaugh / Ettrick valley corridor.
- Underfloor Heating in BannerfieldTD7 4 · Back-boiler conversions, power-flushing and frozen-condensate fixes across Selkirk's elevated Bannerfield estate.
Before you book: local practical answers
Do you cover the Ettrick and Yarrow valleys?+
Yes — Ettrickbridge, Yarrowford, Ashkirk and surrounding rural addresses are all part of our Selkirk round, including oil and LPG work.
Can you replace a back boiler in a Selkirk terrace?+
Yes — back boiler removal and combi installation is one of the most common jobs we do in TD7. We plan flue routing, gas supply upgrades and chimney capping in one visit.
What should be checked before quoting underfloor heating at this Selkirk property?+
Older stone-built terraces around West Port and the Market Place often have legacy back-boilers we routinely replace with combis. We confirm that point on site, then match the underfloor heating specification to the actual building and access rather than assuming every TD7 address is alike.
Is this page aimed at rural owners?+
Yes. The recommendations prioritise rural owners who need to design or repair floor heating around construction, finishes and heat loss. If the building or occupancy differs, the survey is where we adjust the plan.
Is it suitable with a heat pump?+
Usually very suitable because the large emitter area can deliver comfort at lower flow temperatures.
Can underfloor heating work under timber?+
Yes, when output and surface-temperature limits are designed around the exact board and covering.
Relevant work pattern
A relevant job pattern from this area
- Back-boiler removal and combi install in a West Port terrace, freeing the chimney breast for a new fireplace.
- Oil boiler service round through Ettrickbridge and Yarrowford.
- Cold-snap radiator upgrades on an exposed Selkirk hillside property.
Related local guidance
- Smart Heating Controls for SelkirkWireless signal routes are checked through stone walls and multi-storey layouts.
- Air Source Heat Pumps for SelkirkCommissioning data and MCS certificate issued so the grant funds are released without delay.
- Central Heating for SelkirkSmart heating controls (Vaillant vSMART, Nest, Hive) fitted and configured.
- Selkirk neighbourhood guidesSee property-level notes within Selkirk.
How this job moves from question to completion
STEP 1
Loop design
Manifold position, loop lengths and control zones are set out before installation. We also check: Many homes still rely on tank-fed hot water — we give honest advice on whether a combi conversion is the right call.
STEP 2
Pressure-tested install
Pipework is laid and tested before screed or overlay covers it.
STEP 3
Commission zones
Loops are purged, balanced and demonstrated with the chosen controls.
STEP 4
Floor assessment
We confirm build-up, insulation, finish and room-by-room heat demand.
Underfloor Heating in Selkirk: get the scope right before the price
A written Selkirk quote follows a proper look at the property, including the local constraint highlighted above and the needs of rural owners.
Selkirk is not being treated as an interchangeable location page. The recommendation starts with many homes still rely on tank-fed hot water — we give honest advice on whether a combi conversion is the right call. It then combines underfloor heating, the needs of rural owners, access via the A699, and nearby coverage toward Ettrickbridge and Ashkirk.
Tell us what is different about your property
Postcode, building type, occupancy and photographs help us preserve the same property-specific approach when we quote.
Get Your Free Quote
Tell us about your project — we'll respond within one working day.