TD6 · Scottish Borders · for landlords

A properly waterproofed wet room for Melrose

Melrose has one of the most varied housing stocks in the Borders — Victorian villas around Dingleton and the High Street, smaller estates off Weirhill and traditional cottages up toward Eildon. Combine that with a high proportion of second homes and holiday lets and you get a town where reliable heating, sensible servicing intervals and quiet, efficient kit really matter.

Heat pump enquiries have risen sharply with the Eildons backdrop — owners want low-noise outdoor units that disappear into the garden. For wet room installations, that changes the survey, specification or working sequence before price is agreed.

Wet room projects in Melrose begin below the visible finish: joist direction, floor falls, drainage route, ventilation and waterproofing determine whether the room performs. We coordinate the plumbing, tanking, electrical zones and finishes as one programme. Accessible layouts can include level entry, support positions and easy-clean choices without making the room feel institutional. This page is specifically for landlords who need to plan a level-access room with dependable drainage and waterproofing.

Property and access context

What changes the job in Melrose

  • Heat pump enquiries have risen sharply with the Eildons backdrop — owners want low-noise outdoor units that disappear into the garden.
  • Some narrow High Street access means we plan boiler deliveries and skip placement carefully.
  • Several large Victorian villas have legacy gravity-fed systems we routinely upgrade to fully pumped, controlled setups.
  • Holiday-let owners regularly book annual servicing well in advance to avoid a peak-season breakdown.
Installed wet room installations detail relevant to Melrose
A representative wet room installations detail; the final specification follows an on-site survey in Melrose.

Likely projects, not a generic service list

This page is written for landlords who need to plan a level-access room with dependable drainage and waterproofing.

  • 01Annual gas safety certificates across a portfolio of Melrose holiday lets.
  • 02System boiler upgrade in a Dingleton villa — new pressurisation, smart controls and weather compensation.
  • 03Air source heat pump retrofit at a Newstead property paired with larger radiators.

Relevant safeguards, not generic badges

  • Trades coordinated through one project sequence
  • Accessible details planned around the user's movement needs
  • Structure and drainage checked before design sign-off

Relevant work pattern

Local evidence behind the recommendation

  • System boiler upgrade in a Dingleton villa — new pressurisation, smart controls and weather compensation.
  • Air source heat pump retrofit at a Newstead property paired with larger radiators.
  • Annual gas safety certificates across a portfolio of Melrose holiday lets.
On-site wet room installations detail relevant to Melrose
The method and components are selected for the property rather than copied from another address.

From first survey to signed-off work

  1. STEP 1

    Coordinated build

    Strip-out, first fix, waterproofing and finishes follow one sequence. We also check: Heat pump enquiries have risen sharply with the Eildons backdrop — owners want low-noise outdoor units that disappear into the garden.

  2. STEP 2

    Flood and function check

    Drainage, seals, controls and clean-down are checked at handover.

  3. STEP 3

    Measure and inspect

    Structure, drainage, ventilation and movement space are assessed.

  4. STEP 4

    Detail the wet zone

    Falls, former, tanking and finish junctions are specified.

Questions shaped by Melrose properties

Can you service Melrose holiday lets out of season?+

Yes — we deliberately keep autumn slots free for holiday-let owners across TD6. Booking in September or early October avoids a January breakdown when the property is fully booked.

Are heat pumps a good fit for Melrose villas?+

Often, yes — but the radiators usually need upsizing, and we'll model heat loss properly for the older stone walls. We'll be honest if a high-efficiency boiler is a better short-term fit.

What should be checked before quoting wet room installations at this Melrose property?+

Heat pump enquiries have risen sharply with the Eildons backdrop — owners want low-noise outdoor units that disappear into the garden. We confirm that point on site, then match the wet room installations specification to the actual building and access rather than assuming every TD6 address is alike.

Is this page aimed at landlords?+

Yes. The recommendations prioritise landlords who need to plan a level-access room with dependable drainage and waterproofing. If the building or occupancy differs, the survey is where we adjust the plan.

Does an accessible wet room need to look clinical?+

No. Support, seating and level access can be integrated into a warm residential design.

Can a wet room be fitted upstairs?+

Yes, when joists, deflection, former depth and waste fall are assessed before the layout is fixed.

Wet Room Installations in Melrose: get the scope right before the price

A written Melrose quote follows a proper look at the property, including the local constraint highlighted above and the needs of landlords.

Melrose is not being treated as an interchangeable location page. The recommendation starts with heat pump enquiries have risen sharply with the eildons backdrop — owners want low-noise outdoor units that disappear into the garden. It then combines wet room installations, the needs of landlords, access via the A6091, and nearby coverage toward Newstead and Darnick.

Tell us what is different about your property

Postcode, building type, occupancy and photographs help us preserve the same property-specific approach when we quote.

Get Your Free Quote

Tell us about your project — we'll respond within one working day.

Gas Safe Free Site Visit 5-Star Rated