TD9 · Scottish Borders · for landlords

Hawick CP12 inspections for busy landlords

Hawick is one of the larger Borders towns, with a mix of dense Victorian terraces around the town centre, post-war housing on the outer ring and rural properties up the Slitrig and Teviot. We see a wide spread of jobs here — from combi swaps and landlord work in the centre to oil servicing on outlying farms and cottages.

Plenty of rental stock means landlord gas safety certificates feature heavily in our TD9 round. For gas safety certificates, that changes the survey, specification or working sequence before price is agreed.

Annual landlord gas safety inspections (CP12) and homeowner gas safety checks across Hawick. Our Gas Safe registered engineers test every gas appliance — boiler, hob, fire, meter and pipework — for soundness, ventilation, flueing and combustion performance, then issue the certificate the same day. We deal with tenants directly to arrange access, file the digital certificate to you and your letting agent, and set a reminder so the renewal never lapses. This page is specifically for landlords who need to keep safety records current and coordinate access without chasing tenants.

Property and access context

What changes the job in Hawick

  • Plenty of rental stock means landlord gas safety certificates feature heavily in our TD9 round.
  • Dense terracing around High Street and Buccleuch Street means tight gas runs and careful flue siting.
  • Older Victorian housing often has solid walls — we factor this into heat-pump heat-loss surveys honestly.
  • Many outlying properties up the Slitrig valley remain off-grid and rely on oil or LPG.
Installed gas safety certificates detail relevant to Hawick
A representative gas safety certificates detail; the final specification follows an on-site survey in Hawick.

Relevant safeguards, not generic badges

  • Portfolio rates for letting agents and multi-property landlords
  • Gas Safe registered (verifiable on the Gas Safe Register)
  • Digital certificate filing — no lost paper copies

From first survey to signed-off work

  1. STEP 1

    Renewal reminder

    Automatic reminder 30 days before next year's renewal — no missed dates. We also check: Plenty of rental stock means landlord gas safety certificates feature heavily in our TD9 round.

  2. STEP 2

    Book a slot

    Tell us the address and tenant contact — we coordinate access directly.

  3. STEP 3

    On-site inspection

    Full safety check on every gas appliance and the meter installation.

  4. STEP 4

    Issue CP12

    Digital certificate sent the same day to landlord, agent and tenant.

Likely projects, not a generic service list

This page is written for landlords who need to keep safety records current and coordinate access without chasing tenants.

  • 01Bathroom refit in a post-war semi off Mansfield Road.
  • 02Combi swap in a Buccleuch Street terrace with full gas supply upsize.
  • 03Annual oil service round through Denholm and Bonchester Bridge.

Questions shaped by Hawick properties

Do you cover Denholm, Bonchester Bridge and Newcastleton?+

Yes — these are all part of our regular TD9 round, including off-grid oil servicing and LPG work.

Are heat pumps realistic in older Hawick terraces?+

Sometimes, but solid-wall Victorian terraces need a careful heat-loss survey first. In a lot of cases we'll recommend a high-efficiency gas boiler as the better short-term fit, with insulation upgrades planned alongside.

What should be checked before quoting gas safety certificates at this Hawick property?+

Plenty of rental stock means landlord gas safety certificates feature heavily in our TD9 round. We confirm that point on site, then match the gas safety certificates specification to the actual building and access rather than assuming every TD9 address is alike.

Is this page aimed at landlords?+

Yes. The recommendations prioritise landlords who need to keep safety records current and coordinate access without chasing tenants. If the building or occupancy differs, the survey is where we adjust the plan.

What happens if an appliance fails?+

We isolate the unsafe appliance, issue a Warning Notice and quote in writing for the repair. The CP12 is issued for the safe appliances and re-issued in full once the fault is rectified.

How much is a landlord gas safety certificate?+

Single-property CP12s typically run £75–£95 depending on the number of gas appliances. Multi-property landlords get a portfolio discount — ask for a written quote.

Relevant work pattern

Local evidence behind the recommendation

  • Combi swap in a Buccleuch Street terrace with full gas supply upsize.
  • Annual oil service round through Denholm and Bonchester Bridge.
  • Bathroom refit in a post-war semi off Mansfield Road.
On-site gas safety certificates detail relevant to Hawick
The method and components are selected for the property rather than copied from another address.

Gas Safety Certificates in Hawick: get the scope right before the price

A written Hawick quote follows a proper look at the property, including the local constraint highlighted above and the needs of landlords.

Hawick is not being treated as an interchangeable location page. The recommendation starts with plenty of rental stock means landlord gas safety certificates feature heavily in our td9 round. It then combines gas safety certificates, the needs of landlords, access via the A698, and nearby coverage toward Denholm and Bonchester Bridge.

Tell us what is different about your property

Postcode, building type, occupancy and photographs help us preserve the same property-specific approach when we quote.

Get Your Free Quote

Tell us about your project — we'll respond within one working day.

Gas Safe Free Site Visit 5-Star Rated