Melrose · TD6 · Scottish Borders

Boiler Installation in Melrose

Melrose has one of the most varied housing stocks in the Borders — Victorian villas around Dingleton and the High Street, smaller estates off Weirhill and traditional cottages up toward Eildon. Combine that with a high proportion of second homes and holiday lets and you get a town where reliable heating, sensible servicing intervals and quiet, efficient kit really matter.

As Vaillant Advanced Installers we install gas, oil and LPG boilers across Melrose with manufacturer-backed warranties of up to 12 years. A like-for-like swap is usually a single-day job; a full system upgrade — new flue route, magnetic filter, smart controls, system flush and a fresh expansion vessel — typically runs to two or three days on site. We always quote in writing after a proper survey, never over the phone, and we never use commission-based salespeople in your home.

In Melrose we see a real mix of system types — older open-vent setups in the period stock, system boilers in mid-century housing and combis in newer builds. We size every replacement against actual hot-water demand and real radiator output, not a ballpark figure, so the new Melrose (TD6) installation runs efficiently from day one rather than short-cycling through the first winter.

Travel from our Kelso base: 25 minutes via the A6091.

Local considerations in Melrose

  • Several large Victorian villas have legacy gravity-fed systems we routinely upgrade to fully pumped, controlled setups.
  • Holiday-let owners regularly book annual servicing well in advance to avoid a peak-season breakdown.
  • Heat pump enquiries have risen sharply with the Eildons backdrop — owners want low-noise outdoor units that disappear into the garden.
  • Some narrow High Street access means we plan boiler deliveries and skip placement carefully.

What we'll do for you

  • Free survey and a fixed written quote — no high-pressure sales, no commission visits.
  • Up to 12-year Vaillant warranty registration handled for you on the day.
  • Magnetic system filter and full power-flush included on system upgrades.
  • Old boiler, flue and any redundant pipework removed and disposed of responsibly.
  • Smart heating controls (Vaillant vSMART or equivalent) fitted as standard.
  • Building Notice and gas safety paperwork lodged with Gas Safe and your local authority.

Recent Melrose boiler installation work

  • Air source heat pump retrofit at a Newstead property paired with larger radiators.
  • Annual gas safety certificates across a portfolio of Melrose holiday lets.
  • System boiler upgrade in a Dingleton villa — new pressurisation, smart controls and weather compensation.

Every new boiler we install in Melrose is registered with Building Standards on your behalf and the warranty paperwork is handed over before we leave site.

How boiler installation works in Melrose

  1. Step 1

    Free survey

    We assess your existing system, hot water demand, gas supply and any upgrades needed.

  2. Step 2

    Fixed written quote

    Itemised, no-obligation pricing — clear timeline, brand options and warranty terms.

  3. Step 3

    Installation

    Tidy work by Gas Safe registered engineers, dust-sheets down, on schedule.

  4. Step 4

    Demo & aftercare

    System walkthrough, controls demo, paperwork lodged and warranty registered.

Why homeowners in Melrose pick us

  • Gas Safe registered (verifiable on the Gas Safe Register, reg. no. on every quote)
  • Vaillant Advanced Installer status — top tier, 12-year warranty rights
  • Fully insured with public liability cover up to £5m
  • Local engineers — no subcontracted installs

Melrose Boiler Installation FAQs

Can you service Melrose holiday lets out of season?+

Yes — we deliberately keep autumn slots free for holiday-let owners across TD6. Booking in September or early October avoids a January breakdown when the property is fully booked.

Are heat pumps a good fit for Melrose villas?+

Often, yes — but the radiators usually need upsizing, and we'll model heat loss properly for the older stone walls. We'll be honest if a high-efficiency boiler is a better short-term fit.

How much does a new boiler typically cost?+

Most domestic installations fall between £2,200 and £4,500 depending on make, model, controls and any system upgrades. We give you a fixed written price after a free site visit — no surprises on the day.

What warranty will I get?+

Up to 12 years on Vaillant boilers as Advanced Installers; 7–10 years typical on Worcester Bosch, Ideal and Baxi. We register the warranty for you on the day of commissioning.

How disruptive is a boiler swap?+

A like-for-like combi swap usually means one day with the heating off. A full system upgrade or a back-boiler-to-combi conversion runs two to three days. We'll always tell you up front what to expect.

Plumbing or heating engineer needed in Melrose?

From villa upgrades to holiday-let servicing — quote returned the same working day.

Whether it's a Victorian villa upgrade in Dingleton or a quiet heat pump install at Newstead, Melrose properties demand thought — we cover TD6 every week from our Kelso base.

Get a free Melrose boiler installation quote

Tell us about your project and we'll be in touch — usually the same working day. Or call our 24/7 line on 07747 002334.

Prefer to read first? See our main Boiler Installation service page or browse all areas we cover.

Get Your Free Quote

Tell us about your project — we'll respond within one working day.

Gas Safe Free Site Visit 5-Star Rated