Radiator upgrades in the Scottish Borders are sized from the room and intended flow temperature, not by copying the old panel dimensions. We replace corroded or underperforming emitters, adapt imperial pipe centres where necessary and rebalance the whole circuit afterwards. For heat-pump preparation, lower-temperature output is checked room by room so only the emitters that genuinely need changing are included.
Click your town for the local page — local housing stock, fuel mix, planning quirks and recent jobs we've done nearby.
Step 1
Heat need, wall space, pipe centres and finish preferences are recorded.
Step 2
Radiator types are selected against real operating temperatures.
Step 3
Floors are protected, pipework adapted and old units removed.
Step 4
Valves are set so every room receives useful flow.
Local context matters — housing stock, fuel mix and access vary street by street across the Borders. Below are neighbourhoods we cover often:
Plumbing and heating for Maxwellheugh's mix of Victorian villas and 1960s detached homes — long pipe runs, hard water, and listed-neighbour planning sensitivity all factor in.
Combi swaps, gas upsizing, and landlord gas safety work on Kelso's 1970s–80s Broomlands estate, with care on flue positions and garage-conversion relocations.
Zoned-heating diagnostics, unvented cylinder service work, and heat-pump retrofits on Kelso's late-90s Pinnaclehill estate.
Off-grid oil, LPG and heat-pump work on the south bank of the Tweed at Springwood Park, with flood-aware plant-room siting and OFTEC tank compliance.
Combi replacements, landlord CP12s and social-landlord servicing across Langlee's mix of council, housing-association and private stock on the hill-top estate.
New-build snagging, smart-thermostat retrofits and cylinder upgrades across original and modern stock in Tweedbank at the end of the Borders Railway.
Tenement-aware boiler swaps, leak tracing and lead-pipe upgrades along Buckholmside's stone-built mill-era closes on the north-west side of Galashiels.
Cylinder upgrades, smart-controls retrofits and heat-pump feasibility surveys on Mossilee's 1990s–2000s detached stock north of Galashiels.
Council, housing-association and right-to-buy combi work on Hawick's Burnfoot estate, with back-boiler removals and flue-siting care on four-in-a-blocks.
Yes, provided the new output and valve settings are considered within the existing circuit.
Not always. We calculate each room and often find only selected emitters need upsizing.
Usually, using the right radiator width or neat pipe adjustments agreed before work starts.
Central Heating — Scottish Borders
Full central heating systems across the Scottish Borders — first-time installations, system conversions (open-vent to sealed, gravity to ful…
Power Flushing — Scottish Borders
Power flushing in the Scottish Borders is for heating systems with cold radiator panels, noisy circulation, repeated pump failures or dirty …
Air Source Heat Pumps — Scottish Borders
MCS Certified and RECC member, we design and install air source heat pumps across the Scottish Borders. Most of our customers access the Hom…
Tell us where you are and what you need — we'll come back the same working day. Or call our 24/7 line on 07747 002334.
Tell us about your project — we'll respond within one working day.
