Kelso · TD5 · Scottish Borders

Air Source Heat Pumps in Kelso

Kelso is our home town and the base of every van we run. The mix of Georgian townhouses around The Square, modern estates off Inch Road and farms out toward Sprouston means we see almost every kind of heating system in one postcode — gas combis, oil boilers, LPG installs and a growing number of heat pump retrofits.

MCS Certified and RECC member, we design and install air source heat pumps across Kelso. Most of our customers access the Home Energy Scotland Grant (currently up to £7,500) plus an interest-free loan on top — we handle the entire application as part of the quote. Crucially, every system is sized from a proper room-by-room heat-loss survey, not a back-of-the-envelope kW figure, so it actually performs through a Borders winter rather than just ticking a grant box.

Heat-pump performance in Kelso hinges on three things we take seriously: heat-loss accuracy, emitter sizing and outdoor-unit siting. TD5 properties vary from solid-stone walls to modern timber-frame builds, and each needs a different design temperature and flow strategy. We carry out the survey ourselves rather than outsourcing, so the design that lands in your inbox is the one we'll actually install.

Travel from our Kelso base: 0 minutes — we're based here.

Local considerations in Kelso

  • Outlying farms and steadings (Sprouston, Stichill, Smailholm) are off the gas grid and rely on oil or LPG, which we install and maintain regularly.
  • Newer estates such as Pinnaclehill and Inch Road typically have system or combi gas boilers — straightforward swaps with same-day completion.
  • Hard water in parts of TD5 means scale management and filter housings are worth specifying on new installs.
  • Many properties around The Square and Bowmont Street are stone-built with limited loft space — flueing and condensate routing need careful planning.

What we'll do for you

  • MCS Certified — required for Home Energy Scotland Grant funding and the £7,500 grant top-up.
  • Full room-by-room heat-loss survey before any quote — never a generic kW figure.
  • Radiator upsizing and underfloor planning costed in alongside the pump itself.
  • Quiet, modern outdoor units sited carefully for noise, airflow and planning compliance.
  • Hot water cylinder and buffer tank sizing matched to occupancy, not just floor area.
  • Commissioning data and MCS certificate issued so the grant funds are released without delay.

Recent Kelso air source heat pumps work

  • First-floor en-suite added to a Georgian townhouse near The Square — full design, tile and fit.
  • Gas combi swap on Inch Road completed in a single working day with full Vaillant 12-year warranty registration.
  • LPG boiler upgrade on a steading near Sprouston including new flue routing and tank work.

Hundreds of Kelso households on our books, from Pinnaclehill new-builds to farmhouses out by Smailholm.

Each heat pump we commission in Kelso is fully MCS certified and the documentation pack is sent direct to Home Energy Scotland so your grant funds release without delay.

How air source heat pumps works in Kelso

  1. Step 1

    Property survey

    Full heat-loss survey, fabric assessment and a look at existing emitters and cylinder space.

  2. Step 2

    MCS-compliant design & quote

    Sized for your specific property and lifestyle, not a generic spec.

  3. Step 3

    Grant paperwork

    We complete and submit the Home Energy Scotland Grant application on your behalf.

  4. Step 4

    Install & commission

    Typically 3–5 days on site, fully commissioned, MCS certified and registered.

Why homeowners in Kelso pick us

  • MCS Certified installer (MCS number on every quote)
  • RECC consumer code member — full deposit and workmanship protection
  • Vaillant Advanced Installer experience on the same engineering team
  • Heat-loss surveys done in-house, not outsourced

Kelso Air Source Heat Pumps FAQs

Do you cover the rural villages around Kelso?+

Yes — Sprouston, Stichill, Ednam, Smailholm, Yetholm, Morebattle and Greenlaw are all part of our normal local round, including off-grid oil and LPG work.

Are you actually based in Kelso?+

Yes — Graham Oliver Plumbing & Heating is registered at 11 Thomson View, Kelso TD5 7UD. Every van starts and finishes in town, so call-outs in Kelso usually mean same-day attendance.

Will it actually keep my home warm in a Scottish winter?+

Yes — modern Vaillant and Mitsubishi units operate efficiently down to around -15°C. We size and design every system specifically for Scottish climate conditions and check radiator output room-by-room.

Am I eligible for the £7,500 grant?+

Most owner-occupied Scottish homes qualify. We confirm eligibility and guide you through the Home Energy Scotland application as part of the quoting process at no extra cost.

Do I need new radiators?+

Sometimes one or two need upsizing — rarely the whole house. We tell you exactly which (and the cost) inside the written quote, before you commit.

Need a Kelso heating engineer today?

We're round the corner — call our Kelso office and we'll usually be with you the same day.

From Georgian townhouses around The Square to off-grid steadings out toward Sprouston, we know Kelso properties inside out — and being based in TD5 means same-day attendance for most jobs.

Get a free Kelso air source heat pumps quote

Tell us about your project and we'll be in touch — usually the same working day. Or call our 24/7 line on 07747 002334.

Prefer to read first? See our main Air Source Heat Pumps service page or browse all areas we cover.

Get Your Free Quote

Tell us about your project — we'll respond within one working day.

Gas Safe Free Site Visit 5-Star Rated